Burner Management System Comparison: Platinum Control BMS-600 Versus ACL Combustion CSC200

Burner Management Systems (BMS) are critical control components for ensuring safety, compliance, and efficiency of oil and gas production operations. Two prominent names in this space are Platinum Control and ACL Combustion, each offering proven systems designed for flame control, ignition safety, and operational efficiency.

ACL Combustion offers a range of pre-engineered and configurable BMS solutions designed for oilfield burners, line heaters, and incinerators. Their systems are proven in rugged conditions and provide simplified installation and setup for common burner applications.

The most common burner management systems from ACL Combustion include the CSC200 and to a lesser extent the CSC400. The CSC200 is suited for tanks, heater treaters, separators, line heaters, re-boilers and dehydrators.  

This blog compares the Platinum Control BMS-600 with the CSC200 burner management system from ACL Combustion, exploring the strengths and limitations of each, and highlighting how the BMS-600's modular architecture and multi-equipment compatibility provide a unique value proposition.

Top-Rated ACL Combustion (CSC200) Alternatives

The BMS-600 burner management system from Platinum Control has many features that help improve operational efficiency, reduce costs, and minimize the capital tied up in inventory, among other benefits.

One Unit for Every Piece of Fired Equipment. The Platinum Control BMS-600 controller has four operating modes, so it can be used on flares, heater treaters, line heaters, separators, or any type of fired equipment.

“One-Click” Versatility. One of the standout features of the Platinum Control BMS-600 is its versatility. With the click of a switch, the BMS-600 can be reconfigured and moved from one piece of equipment to another without time-consuming reprogramming. The system is engineered to be a singular solution for every type of fired equipment in oil and gas production.

Save Money, Simplify Operations. The BMS-600’s 'Power of ONE Controller' approach simplifies operations and reduces the need for multiple systems, making it a preferred choice for many. One unit for every piece of fired equipment allows you to standardize and avoid purchasing a different model for each equipment type.

Everything Included, Nothing Else to Buy. The BMS-600 comes with everything you need for installation and startup out of the box, including the controller itself, ignition module, cables, and pilot at a price point typically lower than if you purchased them separately. There are no extra components or fittings to purchase that drive up the total cost.

Modular Capabilities. While the Platinum 600 can fit on any type of fired equipment, its capabilities can be expanded using available expansion cards:

• BMS 600. All 600 series units come with built-in data logging; no extra card needed.

• BMS 600M. Base model plus a Modbus expansion card enabling RS485 communication.

• BMS 600MA. Standard 600 equipped with a Modbus/4-20 mA expansion card enabling 4-20 mA inputs and outputs as well as Modbus communications.

One Set of Parts. Because the BMS-600 essentially replaces multiple types of units, you only need to stock one set of parts, further simplifying operations and reducing the amount of capital tied up in inventory.

Dependable. Platinum-600 units have proven themselves reliable in one of the industry’s most competitive and demanding regions. Alternative units are often more complex and have more points of potential failure.

Emissions Reduction. The reliability and effectiveness of the BMS-600 controller significantly reduces the chance of an unlit pilot flame releasing raw gas to the atmosphere, reducing the risk of fines, compliance actions, and super-emitter events.

Continuous Compliance. Another significant advantage of the Platinum Control BMS-600 is its ability to maintain continuous compliance with industry regulations. This ensures that operations run smoothly without interruptions due to non-compliance issues.

Made in America for Upstream Oil & Gas. The BMS-600 is made specifically to meet the requirements of upstream oil and gas production operations for achieving the highest levels of efficiency, maximizing profits and minimizing emissions. Competing alternatives are often over-engineered, and you wind up paying for it.

LEARN MORE: Platinum BMS-600 Product Page

Where the Platinum Control BMS-600 Stands Out

Platinum BMS-600

The biggest differentiator for the Platinum Control BMS-600 is its modular design and equipment agnosticism. Unlike ACL’s product line, which is built around standard equipment configurations, the BMS-600 can quickly be moved from one piece of equipment to another with the click of a switch to fit multiple combustion applications—from a single line heater, to a flare, separator, heater treater or other type of fired equipment.

This makes it a future-proof option for operators who are retrofitting or anticipating growth, system upgrades, or integration into a broader SCADA or safety system.

While the ACL CSC200 is durable, the Platinum Control BMS-600 series is made in America and designed specifically for the upstream oil and gas industry and offers excellent performance and reliability with added simplicity and ease of use. The BMS-600's 'Power of ONE Controller' approach, continuous compliance, and emission reduction make it a solid choice for many operations.

Contact us today to learn more about the BMS-600 burner management system and find out how you can start saving today.

About Platinum Control

Our expertise in Facilities Optimization helps us help you Harness the Full Potential of Your Well Sites. We work with operators of all sizes, from companies having only a handful of wells to supermajors. As a result, we leverage the experience gained with larger operators, build best practices into our products and services, and then disseminate that knowledge to our smaller customers.