5P7A2957_edited_edited.jpg

 PLATINUM-600 BMS 

PLATINUM-600

MSRP: $2,275

  • The system has the ability to operate four different modes of application: Flare, Flare Plus, Igniter and BMS.

  • Use the system to monitor and control up to two temperature set-points.

  • A USB port enables you to capture important data to a memory stick.

  • 4 operational modes (see Specifications)

  • Temperature control – up to 2 thermocouples

  • Very low power consumption

  • Built-in charge controller for solar & line power with battery backup applications

  • Time and date stamped event record log

  • USB port to capture internal data

  • Automatic restart after a power failure

  • Mix and match solenoid drives

  • Selectable status output

  • Optional Thermocouple input for flame detection

  • Internal watchdog system

  • User-friendly setup and operation

  • Ultra bright LED status indicators

  • Password protection secures interface from tampering

  • Optional Add On: Modbus card for communication 

  • Optional Add On: 4-20 Inputs & Outputs card 

SPECIFICATIONS

MODEL TYPES:

 

 

 

GAS SERVICE TYPE:                                        

 

OPERATIONAL MODES:

MAX # IGNITION ATTEMPTS:

POWER REQUIREMENTS (12/24V):

TEMPERATURE RATING:

TEMPERATURE DEVICE:

SOLENOID DRIVES (12/24V):

STATUS OUTPUT:

BATTERY (Optional):

CERTIFICATIONS:

Platinum-600 (Base Model)
Platinum-600M (Modbus Capabilities)
Platinum-600MA (Modbus & 4-20mA Inputs & Outputs Capabilities) 
Natural gas or propane

 

Flare: Ignition control

Flare+: Ignition control & pilot solenoid control

Igniter: Ignition control & up to 3 solenoid control

BMS: Ignition control. up to 3 solenoid control and up to 2 temperature control

 

Flare & Flare+: Infinite, as needed

Igniter & BMS: 3 before shutdown

 

0.20W (Unit operating in flare mode, run status, no solenoids)

 

-40°F to 131°F 

-40°C to 55°C

Up to 2 type-k thermocouples

-Single-coil 

-Dual-coil latching

-Peak & hold

 

Programmable – running, pilot or ESD

 

12V sealed lead-acid, Main enclosure will house up to 14AH battery

Class I, Division 2

C22.2 No. 0-10

ANSI Z21.20 - 2014

CAN/CSA C22.2 No. 60730-2-5-2014

600BMS2.webp
5P7A3834.jpg
500BMS3.webp

WANT TO PLACE AN ORDER

OR NEED MORE INFORMATION?

We would be happy to help!